DigiDesign Command|8 Spécifications télécharger pdf (Page 13)

Chapter 2: Installing and Configuring Command|8 7

Command|8 with Other Control Surfaces

003 or Digi 002 and Command|8

When used as a MIDI control surface with a supported 003 or Digi 002® system, the faders on Com-

mand|8 function as additional faders (9–16). Figure 2 shows fader mapping when Command|8 is used

with a 003. (Plug-ins cannot be edited on Command|8 when used with a 003 or Digi 002.) You can

use Command|8 for expanded fader control, or for remote transport control and monitoring.

Ethernet Control Surfaces and Command|8

Command|8 can be used as a remote transport control for isolation rooms, drum booths, and other

locations, or for remote control of play and record functions. When used with a Digidesign Ethernet

control surface (D-Control

, D-Command

, ProControl™ or Control|24™), Command|8 faders du-

plicate the left-most eight faders currently banked on the larger control surface.

Figure 3 shows basic connections when adding Command|8 to a Control|24 system.

Figure 2. 003 and Command|8 fader mapping

Faders 1–8

Faders 9–16

003 Command|8

Figure 3. Control|24-based Pro Tools system with Command|8 as a remote transport and monitor controller

USB to

computer

Mic input

Control|24

Control Room monitors

Command|8

Alt outputs

Remote

monitoring

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Pas de commentaire

DigiDesign Command|8 Spécifications Page 13