DigiDesign D-Command Spécifications télécharger pdf (Page 61)

Appendix A: Utility Functions 55

LED Tests

Use this test to check all LEDs of similar color si-

multaneously.

To test LEDs:

1 Press the F1 Utility switch to enter Utility

mode.

2 Press the Channel Select switch that corre-

sponds to LED.

The LCD displays tests for each LED color:

Grn (green), Red, Yel (yellow), and All.

3 Select a test by pressing its corresponding

Channel Select switch. To test all LEDs simulta-

neously, select All. The selected LEDs light solid.

4 To turn off the LEDs, select Off.

5 Press the Channel Select switch that corre-

sponds to Exit.

6 Press the F1 Utility switch to exit Utility mode.

LCD Display Test

Use this test to assess the performance of the

LCD display.

To test the LCD display:

1 Press the F1 Utility switch to enter Utility

mode.

2 Press the Channel Select switch that corre-

sponds to Disp.

3 Do one of the following:

• Press the Channel Select switch that corre-

sponds to Block to light all LCD pixels.

– or –

• Press the Channel Select switch that corre-

sponds to Off to extinguish all LCD pixels.

4 Press the Select switch on Channel 8 to stop

the test.

5 Press the Channel Select switch that corre-

sponds to Exit.

6 Press the F1 Utility switch to exit Utility mode.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66

Pas de commentaire

DigiDesign D-Command Spécifications Page 61