DigiDesign Control 24 Spécifications télécharger pdf (Page 115)

Chapter 12: Mixing 105

To make the same assignment to all channels

simultaneously:

1 Press the PAN/SEND switch on a channel.

2 Press the ASSIGN switch in the ASSIGNMENT

section.

3 Turn the channel data encoder to scroll

through the available path choices.

4 While holding APPLY TO ALL CHANNELS or

OPT(ALT)/ALL, conﬁrm the output assignment

by pressing the ﬂashing switch directly below

the channel encoder, or pressing the ASSIGN

switch.

Assigning Sends To Multiple

Output Destinations

There are situations in which it is useful to be

able to send the same signal to multiple destina-

tions, such as in the creation of multiple multi-

channel submixes.

To make multiple output assignments:

1 Press PAN/SEND on the appropriate channel.

2 Press the ASSIGN switch in the ASSIGNMENT

section.

3 Turn the channel data encoder to scroll

through the available path choices.

4 Enter the assignment by pressing the ﬂashing

switch directly below the channel encoder, or

press the ASSIGN switch.

5 Turn the data encoder on the same channel

again to scroll through the choices to another

send destination.

6 While holding CTL/CLUTCH, press the en-

coder’s ﬂashing switch to make the additional

output assignment.

Displaying Send Assignments

In Pan/Sends mode, send assignments are dis-

played. In Sends View mode, you can check out-

put assignments at any time with the master IN-

PUT and OUTPUT switches.

To temporarily display input or output assignments

in Sends View mode:

■ Press INPUT or OUTPUT.

The currently assigned routing settings will be

displayed in each channel’s scribble strip for as

long as you press the switch.

Multiple outputs from the same channel are in-

dicated with the “+,” “*,” and “@”symbols.

When more than one output is assigned, and all

members are active, the “+” sign appears in the

send routing display.

If multiple outputs are assigned, but one or

more of these outputs is currently inactive, this

is indicated by a “*” symbol in the send routing

display.

The “@” symbol indicates an inactive assign-

ment or path. This corresponds to a “greyed-

out” view in Pro Tools on-screen.

Muting Sends

To mute a send in the Fader section:

1 Make sure the appropriate channels are

banked into view on Control|24.

2 Select the send to be muted by pressing the

corresponding master SEND switch (A/F–E/J) in

the SENDS section.

When making a send assignment for all

channels simultaneously, you will not see

any of the activated sends other than the

currently focused channel’s assignments,

because Pan/Send mode only displays one

channel at a time.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 158 159

Commentaires sur ces manuels

Pas de commentaire